DSO/MSO's - Dual Serial Bus Decoding

Practically all Yokogawa DL and SB series DSO's and MSO's can decode up to two different serial busses simultaneously when equipped with the serial bus decode package. You can analyze two CAN bus signals with different conditions (for example, Hi-Speed and Low-Speed CAN) and display the analysis results along with waveforms. You can then correlate between the upstream data (backbone) network CAN bus and the downstream (sub) network. This can also be applied to any two of the available serial busses such as I2C, SPI, UART, CAN, LIN, and even FlexRay. FlexRay is available only on the SB5000 and DLM2000 series scopes. Some serial busses can be triggered and decoded using both the analog input CH's or logic input CH's.